Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 1111:2018

Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification

Feb 14, 2018

General information

60.60     Feb 14, 2018

BDS

ТК-83

European Standard

91.140.70  

English  

Buying

Published

Language in which you want to receive the document

Scope

This European Standard specifies general construction, performance and material requirements for PN 10 thermostatic mixing valves (TMV) and includes test methods for the verification of mixed water temperature performance at the point of use below 45 °C. This does not exclude the selection of higher temperatures where available. When these devices are used to provide anti-scald protection for children, elderly and disabled persons the mixed water temperature needs to be set at a suitable bathing temperature (body temperature approximately 38 °C) as children are at risk to scalding at lower temperatures than adults. This does not obviate the need for supervision of young children during bathing.
It applies to valves intended for use on sanitary appliances in kitchens, washrooms (incl. all rooms with sanitary tapware, e.g. toilets and cloakrooms) and bath rooms operating under the conditions specified in Table 1.
This standard allows TMVs to supply a single outlet or a small number of outlets in a "domestic" application (e.g. one valve controlling a shower, bath, basin and/or bidet), excluding valves specifically designed for supplying a large number of outlets (i.e. for institutional use).
The tests described are type tests (laboratory tests) and not quality control tests carried out during manufacture.
Table 1 - Conditions of use

Life cycle

PREVIOUSLY

Replaces
БДС EN 1111:2001

NOW

PUBLISHED
БДС EN 1111:2018
60.60 Standard published
Feb 14, 2018

CORRIGENDA / AMENDMENTS

Amended by
prБДС EN 1111:2017/A1:2021

Related project

Adopted from EN 1111:2017