Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 1012-3:2013

Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors

Jan 21, 2014
Sep 18, 2018

General information

90.93     Sep 11, 2019



European Standard

23.140     23.160  

English   Bulgarian  



Language in which you want to receive the document


This European Standard is applicable to process gas compressors and process gas compressor units having an operating pressure greater than 0,5 bar (gauge), an input shaft power greater than 0,5 kW and designed to compress all gases other than air, nitrogen or inert gases which are covered in Part 1. This document deals with all significant hazards, hazardous situations and events relevant to the design, installation, operation, maintenance, dismantling and disposal of process gas compressors and process gas compressor units, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This part of EN 1012 includes under the general term compressor units those machines which comprise:
- the compressor;
- a drive system including the prime mover;
- any component or device supplied which is necessary for operation.
This part of EN 1012 is not applicable to compressors which are manufactured before the date of publication of this document by CEN.
The requirements of this European Standard do not take into account the interaction between the compressor/compressor unit and other processes carried out on site.
Excluded are:
- refrigerant compressors used in refrigerating systems or heat pumps for which the safety requirements are given in EN 60335-2-34 or EN 12693;
- the specification of performance levels and/or safety integrity levels for safety related parts of control systems.
Performance levels and/or safety integrity levels are an important aspect of compressor design and should be determined by the manufacturer and the user based on a risk assessment (see Introduction).
This European Standard does not cover those safety aspects of road transport dealt with by EC legislation for trailers.

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.


Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)


Life cycle


БДС 15190:1980


БДС EN 1012-3:2013
90.93 Standard confirmed
Sep 11, 2019

Related project

Adopted from EN 1012-3:2013