Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 1090-1:2009+A1:2012

Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components

Feb 17, 2012
Sep 20, 2012

General information

60.60     Feb 17, 2012

BDS

ТК-56

European Standard

91.080.13     91.080.17  

English   Bulgarian  

Презумцията за съответствие влиза в сила от 01.09.2012.

Buying

Published

Language in which you want to receive the document

Scope

This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics.
This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures.
The components can be used directly or in construction works or as structural components in the form of kits.
This European Standard applies to series and non-series structural components including kits.
The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e.g. anodising of aluminium.
This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4.
This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems.
NOTE For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.

89/106/EEC

Construction products

Harmonized
305/2011

Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec

Harmonized

Life cycle

PREVIOUSLY

WITHDRAWN
БДС EN 1090-1:2009

NOW

PUBLISHED
БДС EN 1090-1:2009+A1:2012
60.60 Standard published
Feb 17, 2012

Related project

Adopted from EN 1090-1:2009+A1:2011