Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 12267:2003+A1:2010

Food processing machinery - Circular saw machines - Safety and hygiene requirements

Oct 19, 2010

General information

90.60     Sep 2, 2017

BDS

ЕРГ 3

European Standard

67.260  

English  

Buying

Published

Language in which you want to receive the document

Scope

This European Standard specifies requirements for the design and manufacturing of circular saw machines (see Figures 1 and 2).
The machines covered by this European Standard are used to cut bone and meat.
The circular saw machines covered by this European Standard do not include circular saw machines for processing of wood and similar materials and the requirements of EN 1870-1 do not apply.
Circular saw machines for domestic use are not included in this European Standard.
This European Standard applies only to machines which are manufactured after the date of issue of this European Standard.
This European Standard covers the following types of machines:
Circular saw machines with a feed table and a fixed product pusher
- The distance "A" from the floor to the top surface of the feed table is from 800 mm to 1050 mm. The saw blade diameter is between 350 mm and 400 mm (see Figure 1).
- Circular saw machines installed in a cutting line (e.g. conveyor belt or roller conveyor), e.g. with a protective component which can be lifted on the feed and discharge side. The saw blade diameter is between 350 mm and 400 mm (see Figure 2).

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.

98/37/EC

Machinery

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Harmonized

Life cycle

PREVIOUSLY

WITHDRAWN
БДС EN 12267:2004

NOW

PUBLISHED
БДС EN 12267:2003+A1:2010
90.60 Close of review
Sep 2, 2017

Related project

Adopted from EN 12267:2003+A1:2010