Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 10025-6:2004+A1:2009

Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition

Sep 30, 2009
Sep 16, 2010
95.99 Withdrawal of Standard   Dec 16, 2019

General information

95.99     Dec 16, 2019



European Standard

77.140.10     77.140.50  

English   Bulgarian  



Language in which you want to receive the document


Part 6 of this document, in addition to part 1, specifies requirements for flat products of high yield strength alloy special steels. The grades and qualities are given in Tables 2 to 4 (chemical composition) and Tables 5 to 7 (mechanical properties) and are supplied in the quenched and tempered condition as given in 6.3.
The steels specified in this document are applicable to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness <= 150 mm for grades S460, S500, S550, S620 and S690, a maximum nominal thickness <= 100 mm for grade S890 and a maximum nominal thickness <= 50 mm for grade S960, in steels which, after quenching and tempering, have a specified minimum yield strength of 460 MPa ) to 960 MPa1).

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.


Construction products


Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec

Life cycle


БДС EN 10025-6:2005


БДС EN 10025-6:2004+A1:2009
95.99 Withdrawal of Standard
Dec 16, 2019


БДС EN 10025-6:2019

Related project

Adopted from EN 10025-6:2004+A1:2009