Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 13124-2:2004

Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test

Aug 20, 2004

General information

90.92     Jul 24, 2020



European Standard

13.230     91.060.50  




Language in which you want to receive the document


This European Standard specifies a test procedure to permit classification of the explosion resistance of windows, doors and shutters together with their infills.
This European Standard concerns a test method against blast waves in open air resulting from high explosives that can be carried by hand and placed a few metres from a target. At such close distances blast values vary across an attack face. Controlled measurement of the actual blast on the face of the test specimen being difficult, costly and subject to inaccuracy, consistency of the blast forces is therefore controlled in this European Standard by the characteristics of the explosive charge and its location (see annex A and annex B).
This European Standard covers only the behaviour of the complete unit including infill, frame and fixings as tested. It gives no information on the ability of the surrounding wall or building structure to resist the direct or transmitted forces.
If the windows, doors and shutters are intended for specific conditions of climate, specific test conditions can be required.
This European Standard gives no information on the behaviour of the units subjected to other types of loading.

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.


Construction products


Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec

Life cycle


БДС EN 13124-2:2004
90.92 Standard to be revised
Jul 24, 2020


prБДС EN 13124-2 rev:2022

Related project

Adopted from EN 13124-2:2004