Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

БДС EN 13706-3:2003

Reinforced plastics composites - Specifications for pultruded profiles - Part 3: Specific requirements

Oct 23, 2003

General information

90.93     Dec 3, 2022

90.00    Dec 3, 2027



European Standard

83.120     83.140.99  




Language in which you want to receive the document


This part 3 Of ENxxxx defines the specification of pultruded profiles. The specification defines those properties which shall be specified and the level to be obtained for each grade of profile. The specification defines grades where the short-form code, Exx, is related to the Young's modulus of the material measured by testing a length of the full section profile. Two grades; E23 and E17 are defined. Note: Other grades may be introduced at future revisions of the standard. The properties which shall be achieved for each class of profile are given in Table 1. Other properties that may be reported are listed in Table 2.

Life cycle


БДС EN 13706-3:2003
90.93 Standard confirmed
Dec 3, 2022

Related project

Adopted from EN 13706-3:2002