Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

prБДС EN ISO 17779:2022

Brazing - Specification and qualification of brazing procedures for metallic materials (ISO 17779:2021)

General information

60.55     Dec 25, 2022

60.60   

BDS

ТК-30

European Standard

25.160.01     25.160.50  

Scope

This document specifies requirements for the specification and qualification of brazing procedures for brazing of metallic materials.
This document specifies requirements for brazing of the test piece, testing of the test specimen, essential variables and their range of qualification, acceptance criteria, brazing procedure qualification record (BPQR) and brazing procedure specification (BPS).
This document gives general provisions on quality requirements for brazing (see Annex A).
This document does not cover testing of residual stresses, corrosion resistance and impact properties.
This document applies to the following brazing processes according to ISO 857-2 and ISO 4063:2009 with local and global heating:
—    911 Infrared brazing;
—    912 Flame brazing, torch brazing;
—    913 Laser beam brazing;
—    914 Electron beam brazing;
—    916 Induction brazing;
—    918 Resistance brazing;
—    919 Diffusion brazing;
—    921 Furnace brazing;
—    922 Vacuum brazing;
—    923 Dip-bath brazing;
—    924 Salt-bath brazing;
—    925 Flux bath brazing;
—    926 Immersion brazing;
—    972 Arc weld brazing.
The principles of this document can be applied to other brazing processes and brazing of materials not listed.

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.

2014/68/EU

Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment

Life cycle

PREVIOUSLY

PUBLISHED
БДС EN 13134:2002

NOW

IN DEVELOPMENT
prБДС EN ISO 17779:2022
60.55 Ratification completed (DOR)
Dec 25, 2022

Related project

Adopted from prEN ISO 17779 IDENTICAL

Adopted from ISO 17779:2021 IDENTICAL