This document specifies the safety requirements and measures for combined woodworking machines (defined in 3.1), capable of continuous production use, with manual loading and unloading of the workpiece and hereinafter referred to also as “machines”.
The machines are designed to cut solid wood and material with similar physical characteristics to wood.
It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account.
This document does apply to machines also equipped with the devices/additional working units listed in the Scopes of ISO 19085 5:202x, ISO 19085 6:202x, ISO 19085-7:202x and ISO 19085-9:202x.
This document does not apply to:
a) machines incorporating only a planing unit and a mortising device;
NOTE Such machines are dealt with in ISO 19085-7:202x.
b) combined machines incorporating a band saw unit;
c) machines with a mortising unit with a separate drive other than the planing unit drive;
d) machines intended for use in potentially explosive atmosphere;
e) machines manufactured before the date of its publication as an International Standard.
When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.
Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
БДС EN ISO 19085-11:2020
prБДС EN ISO 19085-11:2022
40.60 Close of voting
Aug 30, 2022