This European Standard specifies the emission and immunity requirements for all types of rolling
stock. It covers traction stock, hauled stock and trainsets including urban vehicles for use in city
streets. This European standard specifies the emission limits of the rolling stock to the outside world.
The scope of this part of the standard ends at the interface of the rolling stock with its respective
energy inputs and outputs. In the case of locomotives, trainsets, trams etc., this is the current collector
(pantograph, shoe gear). In the case of hauled stock, this is the AC or DC auxiliary power connector.
However, since the current collector is part of the traction stock, it is not entirely possible to exclude the
effects of this interface with the power supply line. The slow moving test has been designed to
minimize these effects.
There may be additional compatibility requirements within the railway system identified in the EMC plan
(e.g. as specified in EN 50238).
Basically, all apparatus to be integrated into a vehicle meet the requirements of EN 50121-3-2. In
exceptional cases, where apparatus meets another EMC Standard, but full compliance with
EN 50121-3-2 is not demonstrated, EMC is ensured by adequate integration measures of the
apparatus into the vehicle system and/or by an appropriate EMC analysis and test which justifies
deviating from EN 50121-3-2.
Electromagnetic interference concerning the railway system as a whole is dealt with in EN 50121-2.
These specific provisions are to be used in conjunction with the general provisions in EN 50121-1.
The frequency range considered is from 0 Hz (DC) to 400 GHz. No measurements need to be
performed at frequencies where no requirement is specified.
When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.
Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
БДС EN 50121-3-1:2017
БДС EN 50121-3-1:2017/A1:2019
prБДС EN 50121-3-1:2022
45.99 Dispatch of FV draft to CCMC
Jun 15, 2022