Bulgarian Institute for Standardization
Standards – always a step ahead
Phone: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
1797 Sofia, 13 "Lachezar Stanchev" Str., "Izgrev" Complex
ID number: 175079183, VAT number: BG175079183
Main menu

prБДС EN ISO 13577-2:2022

Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems

General information

45.99     Mar 16, 2022

50.20    Jun 22, 2022

BDS

ТК-41

European Standard

13.100     25.180.01  

Scope

This part of ISO 13577 specifies the safety requirements for combustion and fuel handling systems that are part of industrial furnaces and associated processing equipment (TPE).
NOTE The general safety requirements common to TPE are provided in ISO 13577-1 (See introduction) Annex°B of ISO 13577-1 also includes a list of processes for which industrial furnaces and heating systems covered by ISO 13577 may be used.
This part of ISO 13577 deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems as listed in Annex E, when used as intended and under the conditions foreseen by the manufacturer.
This part of ISO 13577 covers:
— fuel pipework downstream of and including the manual isolating valve;
— combustion air supply (including oxygen and oxygen enriched combustion air) and flue gas system;
— burner(s), burner system and ignition device;
— functional requirements for safety related control system.
This part of ISO 13577 applies to any oxidation with air or other gases containing free oxygen of gaseous and liquid fuels or any combustion of them to release thermal energy in TPE.
For thermal or catalytic post combustion and waste incineration, this part of ISO 13577 applies only to auxiliary burners designed to start-up and/or support the process.
The pressure hazard of the piping and components covered by this part of ISO 13577 is within the maximum pressure/size relationship of category I as described in normative Annex A.
This part of ISO 13577 also gives the necessary requirements regarding information for use.
This part of ISO 13577 does not cover hazards from heating generated by electricity.
This part of ISO 13577 does not deal with the hazards created by the release of flammable substances from the products processed in the TPE.
This part of ISO 13577 is not applicable to combustion and fuel handling systems:
— of gas welding and allied processes
— up-stream of the TPE manual isolating valve.
This part of ISO 13577 is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries.
This part of ISO 13577 is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system.
This document is not applicable to combustion and fuel handling systems manufactured before the date of its publication.

Directives and Regulations

When the standard is harmonized under a directive or regulation, the word Harmonized appear. When such an inscription does not appear, it means that the standard is related to / supporting the relevant directive or regulation.

2006/42/EC

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)

Life cycle

PREVIOUSLY

Replaces
БДС EN 746-2:2010

NOW

IN DEVELOPMENT
prБДС EN ISO 13577-2:2022
45.99 Dispatch of FV draft to CCMC
Mar 16, 2022

Related project

Adopted from prEN ISO 13577-2

Adopted from ISO/FDIS 13577-2