Чрез стандартите - винаги крачка напред
E-mail: info@bds-bg.org
София 1797, ул. "Лъчезар Станчев" 13, ж.к. "Изгрев"
ЕИК: 175079183, ИН по ДДС: BG175079183
ISO 10930:2012
Soil quality — Measurement of the stability of soil aggregates subjected to the action of water
Главна информация
Купи
Действащ
Обект и област на приложение
This International Standard specifies the treatments for the measurement of the stability of soil aggregates. It
can be applied to a wide range of materials originating mainly from the tilled horizons of cultivated soils. It can,
however, also apply to any soil profile horizon, whether it is cultivated or not. Aggregates ranging from 3 mm
to 5 mm are measured.
However, the presence of gravel in the 2 mm to 5 mm fraction can distort the results. If the percentage of gravel
is between 10 % and 40 %, the > 2 mm fraction of the gravel obtained from the tests should be washed and
a mean weighted diameter (MWD, see 6.1) calculated with and without gravel. If the percentage of gravel is
> 40 %, the structural stability tests are not significant. The method does not apply to unstructured materials,
as they are not sufficiently cohesive to form millimetric aggregates.
Жизнен цикъл
СЕГА
ДЕЙСТВАЩ
ISO 10930:2012
90.93
Решение за продължаване на действието на стандарт
13.02.2023 г.
Национален стандарт
Качество на почви. Измерване на устойчивостта на почвени агрегати, подложени на действието на вода (ISO 10930:2012)
60.60 Публикуван стандарт