Български институт за стандартизация
Чрез стандартите - винаги крачка напред
Телефон: +359 2 8174 523, +359 2 8174 504
E-mail: info@bds-bg.org
София 1797, ул. "Лъчезар Станчев" 13, ж.к. "Изгрев"
ЕИК: 175079183, ИН по ДДС: BG175079183
Главно меню

БДС EN 16602-70-13:2015

Осигуряване на продукт за космическа техника. Измерване на силата на отделяне на покрития и повърхностни обработки чрез самозалепващи ленти

Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
18.05.2015 г.

Главна информация

90.93     13.01.2021 г.

90.00    13.01.2026 г.



Европейски стандарт

49.040     49.140  




Език, на който желаете да получите документа

Обект и област на приложение

This Standard details a test in which pressure‐sensitive tapes are used to assess
the suitability of, for example, coatings, paints, films and other thin materials,
proposed for use on spacecraft and associated equipment.
Surface coatings, such as thermal control paints and corrosion protection
coatings, are affected, both on the ground and after launch, by exposure to the
It is therefore important that the adhesion of the coating to the relevant
substrate remains at an acceptable level after exposure to the relevant
environmental condition.
The following materials and assemblies are covered by this test method:
 organic coating, e.g. varnishes, paints and plastic films;
 metallic finishes on, for example, printed circuit boards, second‐surface
mirrors, thermal radiators, plastic films;
 adhesive layers;
 composite thin films;
 small assemblies, e.g. solar cells having attached glass covers.
This standard may be tailored for the specific characteristics and constrains of a
space project in conformance with ECSS‐S‐ST‐00.

Жизнен цикъл


БДС EN 14099:2004


БДС EN 16602-70-13:2015
90.93 Решение за продължаване на действието на стандарт
13.01.2021 г.

Свързан проект

Въвежда EN 16602-70-13:2015